No products found.
Microneedling with derma rollers is an effective skincare treatment with many benefits like stretch marks, acne scarring, reduction in the appearance of wrinkles, acne scarring, and promotion of hair/beard growth. Derma rolling procedure is easy and safe to carry out at home.
A derma roller picks up dirt and bacteria when in use from the skin’s surface, so not cleaning it leads to the growth of bacteria, which can easily be transferred back into your skin on its next use, possibly causing an infection. Therefore, it is very vital to clean your derma rollers every time you use them.
Our editors have reviewed the best derma rollers in the market, Sdara Derma Roller 540 Microneedle Roller being our best overall model. This derma roller will help reduce the fine lines, acne scarring and prevent the signs of aging. Additionally, it is very easy to clean, and with that said, let’s take a look at how to clean a derma roller.
Steps on How to Thoroughly Clean your Derma Roller
Step 1
- Fill a plastic container with warm water and add few drops of washing-up liquid. Place the derma roller upside down in the plastic container and leave it to soak (for about 10 to 20 minutes) until clean. Rinse the roller with hot water. This procedure will clean the roller by removing any blood or skin cells; however, it will not sterilize it.
Step 2
- Thoroughly spray the roller, ensuring all the needles are coated. Place the derma roller facing up on a clean paper towel and let it air-dry.
Step 3
- After the derma roller is dry completely, please put it back into the storage container.
Steps on How to Sterilize Your Derma Roller
Step 1
- Start by rinsing your roller with lukewarm water for 2-3 minutes to remove any surface debris such as dead skin or blood. This debris may not get removed using alcohol only since alcohol cannot dissolve dead skin cells or blood.
Step 2
- Take a small plastic bowl and pour 60-90 percent isopropyl alcohol (also referred to as rubbing alcohol) or hydrogen peroxide in it. Please fill up the plastic bowl to the point that it covers the derma roller completely. Conversely, make sure the isopropyl alcohol is not less than 60 percent to disinfect your roller.
Step 3
- Let the roller be soaked for at least one hour. Doing so will ensure it is thoroughly sanitized. It is also crucial to keep the needles of your derma roller upside down in the container.
Step 4
- Once the derma roller soaks for an hour, please remove it from the container. Then, turn on your faucet and hold the roller under warm running water for at least 30 to 60 seconds. The warm water will remove the remaining skin particles, peroxide, or alcohol.
Step 5
- Place your derma roller upside down on a paper towel and let the derma roller sit there for at least 10-20 minutes for air drying. After your roller is dry, place it back in its protective container and tighten the lid.
What to Avoid when Cleaning/Sterilizing Your Derma Roller
- Boiling water-Exposing the derma rollers to high heat or temperatures can completely damage the needles.
- Bleach- Since the derma roller is used on your skin, you should avoid harsh cleaning chemicals.
- Milton sterilizing fluid- This sterilizing product is not intended for use on metal; you should avoid it since it will disintegrate the needles of your derma roller.
How to Use Derma Rollers Perfectly
Step 1: Disinfect your derma roller.
Let your roller soak in 70% isopropyl alcohol for approximately 5 to 10 minutes.
Step 2: Wash your face
Wash your face well using a pH-balanced cleanser. If you use a derma roller with a needle length of up to 0.5mm, you will need to wipe down your face with 70% isopropyl before the rolling process.
Step 3: Begin your derma rolling process
Before you begin, you can apply numbing cream if you need it, then;
- Roll the roller in one direction 5 to 10 times, depending on your skin sensitivity and tolerance. Lift, then repeat.
- After rolling, adjust the roller slightly and repeat. Do this process repeatedly until you have covered the whole face.
- After rolling the derma roller in one direction, it is time to go back over the areas and repeat the same thing in the perpendicular direction.
- By the entire procedure, you should have rolled over each section 12 to 16 times- six horizontally, eight vertically.
Step 4: Wash your face with clean water
After you are done derma needling, cleanse your face with clean water.
Step 5: Clean your derma roller
Clean your derma roller with castile soap or dishwasher soap. Create a soapy water mix in a container, then swirl around the derma roller thoroughly, ensuring the roller does not hit the sides. We use detergents directly after rolling because alcohol content doesn’t dissolve the proteins found in the skin.
Step 6: Disinfect your derma roller.
Disinfect your roller again by letting it soak in the 70% isopropyl alcohol for at least 10 minutes. Then, please put it back in its case and store it somewhere safe.
Last update on 2023-10-04 / Affiliate links / Images from Amazon Product Advertising API